Enter decimal or fractional inches (e.g., 12' 4 1/2")
Enter each value on a new line. Use "Add separator" button or press Enter.
Midpoint (Center)
—
Division Results
Each segment length:
—
Statistics
Values count:
—
Sum:
—
Min:
—
Max:
—
Mark positions from start (0):
Entered values:
Settings
This calculator operates in two modes: dividing a length into equal parts with mark positions, and calculating the average of multiple measurements with statistics.
Divide Length Mode
Enter a total measurement and select how many segments you need. The calculator displays the midpoint, segment length, and exact mark positions with both decimal and fractional values for imperial units.
Midpoint = Total Length ÷ 2
Segment Length = Total Length ÷ Number of Parts
Mark Positionn = Segment Length × n
Board Center for Shelf Bracket
36" ÷ 2 = 18" midpoint
Wall Studs at 16" Spacing
8' (96") ÷ 6 = 16" per segment
Deck Post Layout
12' 6" ÷ 5 = 2' 6" each
Metric Tile Layout
245 cm ÷ 4 = 61.25 cm per section
Fence Panel Division
2.4 m ÷ 3 = 0.80 m each
Average Values Mode
Enter multiple measurements (one per line) to calculate the average, sum, minimum, and maximum values. The visual diagram shows value distribution with the average position.
Average = Sum of Values ÷ Count
Sum = Value1 + Value2 + ... + Valuen
Average Board Length
24", 25 1/2", 24 3/4" → Avg: 24.75"
Tile Width Variations
30.2, 30.5, 30.1 cm → Avg: 30.27 cm
Pipe Sections Average
1.2, 1.5, 1.3, 1.4 m → Avg: 1.35 m
Lumber Measurements
8' 2", 8' 4", 8' 1" → Avg: 8' 2 1/3"
Beam Height Check
152, 150, 153, 151 mm → Avg: 151.5 mm
The calculator accepts flexible input formats including decimal values, fractions (e.g., 12 1/2), and feet-inches notation (e.g., 8' 6 1/4"). Results display in your chosen unit with configurable decimal precision and fractional approximations down to 1/32".