Convert US liquid pint to liter on the exact lpt-to-l page. The calculator works both ways: type pt (US) or L and it updates the other field.
Describe the task to the AI assistant and continue from the result.
Open AI assistant →US liquid pint to liter Converter
Formula: L = pt (US) x 0.473176473. Reverse formula: pt (US) = L x 2.113376418865.
Conversion table
| US liquid pint | liter |
|---|---|
| 1 pt (US) | 0.47317647 L |
| 2 pt (US) | 0.94635295 L |
| 5 pt (US) | 2.36588237 L |
| 10 pt (US) | 4.73176473 L |
| 25 pt (US) | 11.82941182 L |
| 100 pt (US) | 47.3176473 L |
Unit notes
A US liquid pint is 16 US fluid ounces, about 473.176 ml. It is smaller than an Imperial pint. A liter is one cubic decimeter and 0.001 cubic meter.
Common mistakes
Do not mix US and Imperial units unless the page explicitly says so. If the query uses ounce, pint, quart, or gallon, check whether it means a liquid volume unit, a dry volume unit, or a mass unit. This page is locked to US liquid pint -> liter.
When this page is the right answer
Use it when the source value is already in US liquid pint and the target answer must be in liter. For a different pair, use full volume converter, US quart to liter, US fluid ounce to ml, cubic meters to US gallons, cubic yards to US gallons.
Quick answer
1 pt (US) = 0.473176473 L. In reverse, 1 L = 2.113376418865 pt (US).
Search-style examples
| Input | Converted result | Half of that result |
|---|---|---|
| 1 pt (US) | 0.47317647 L | 0.23658824 L |
| 2 pt (US) | 0.94635295 L | 0.47317647 L |
| 5 pt (US) | 2.36588237 L | 1.18294118 L |
| 10 pt (US) | 4.73176473 L | 2.36588237 L |
| 25 pt (US) | 11.82941182 L | 5.91470591 L |
Standard used on this page
Source unit: US liquid pint, 16 US fl oz, not Imperial pint. Target unit: metric liter, 0.001 m3. This matters because pints, quarts, gallons and fluid ounces can refer to different systems in search results.
Sanity check
If your result is off by about 20%, the usual cause is mixing US and Imperial liquid units. If it is off by a factor near 1000, check whether the input was liters, milliliters or cubic meters.