Convert cubic yard to US gallon on the exact yd3-to-gal page. The calculator works both ways: type yd3 or gal (US) and it updates the other field.
Describe the task to the AI assistant and continue from the result.
Open AI assistant →cubic yard to US gallon Converter
Formula: gal (US) = yd3 x 201.974025974026. Reverse formula: yd3 = gal (US) x 0.004951131687.
Conversion table
| cubic yard | US gallon |
|---|---|
| 1 yd3 | 201.97402597 gal (US) |
| 2 yd3 | 403.94805195 gal (US) |
| 5 yd3 | 1009.87012987 gal (US) |
| 10 yd3 | 2019.74025974 gal (US) |
| 25 yd3 | 5049.35064935 gal (US) |
| 100 yd3 | 20197.4025974 gal (US) |
Unit notes
A cubic yard is 27 cubic feet and is common for bulk material volumes. This page uses the US liquid gallon, not the Imperial gallon or US dry gallon.
Common mistakes
Do not mix US and Imperial units unless the page explicitly says so. If the query uses ounce, pint, quart, or gallon, check whether it means a liquid volume unit, a dry volume unit, or a mass unit. This page is locked to cubic yard -> US gallon.
When this page is the right answer
Use it when the source value is already in cubic yard and the target answer must be in US gallon. For a different pair, use full volume converter, US pint to liter, US quart to liter, US fluid ounce to ml, cubic meters to US gallons.
Quick answer
1 yd3 = 201.974025974026 gal (US). In reverse, 1 gal (US) = 0.004951131687 yd3.
Search-style examples
| Input | Converted result | Half of that result |
|---|---|---|
| 0.5 yd3 | 100.98701299 gal (US) | 50.49350649 gal (US) |
| 1 yd3 | 201.97402597 gal (US) | 100.98701299 gal (US) |
| 2 yd3 | 403.94805195 gal (US) | 201.97402597 gal (US) |
| 5 yd3 | 1009.87012987 gal (US) | 504.93506494 gal (US) |
| 10 yd3 | 2019.74025974 gal (US) | 1009.87012987 gal (US) |
Standard used on this page
Source unit: cubic yard, 27 cubic feet. Target unit: US liquid gallon, not Imperial gallon. This matters because pints, quarts, gallons and fluid ounces can refer to different systems in search results.
Sanity check
If your result is off by about 20%, the usual cause is mixing US and Imperial liquid units. If it is off by a factor near 1000, check whether the input was liters, milliliters or cubic meters.