Convert US liquid quart to cubic foot on the exact lqt-to-ft3 page. The calculator works both ways: type qt (US) or ft3 and it updates the other field.
Describe the task to the AI assistant and continue from the result.
Open AI assistant →US liquid quart to cubic foot Converter
Formula: ft3 = qt (US) x 0.033420138889. Reverse formula: qt (US) = ft3 x 29.922077922078.
Conversion table
| US liquid quart | cubic foot |
|---|---|
| 1 qt (US) | 0.03342014 ft3 |
| 2 qt (US) | 0.06684028 ft3 |
| 5 qt (US) | 0.16710069 ft3 |
| 10 qt (US) | 0.33420139 ft3 |
| 25 qt (US) | 0.83550347 ft3 |
| 100 qt (US) | 3.34201389 ft3 |
Unit notes
A US liquid quart is 2 US liquid pints or about 946.353 ml. A cubic foot is a volume cube one foot on each side.
Common mistakes
Do not mix US and Imperial units unless the page explicitly says so. If the query uses ounce, pint, quart, or gallon, check whether it means a liquid volume unit, a dry volume unit, or a mass unit. This page is locked to US liquid quart -> cubic foot.
When this page is the right answer
Use it when the source value is already in US liquid quart and the target answer must be in cubic foot. For a different pair, use full volume converter, US pint to liter, US quart to liter, US fluid ounce to ml, cubic meters to US gallons.
Quick answer
1 qt (US) = 0.033420138889 ft3. In reverse, 1 ft3 = 29.922077922078 qt (US).
Search-style examples
| Input | Converted result | Half of that result |
|---|---|---|
| 1 qt (US) | 0.03342014 ft3 | 0.01671007 ft3 |
| 2 qt (US) | 0.06684028 ft3 | 0.03342014 ft3 |
| 5 qt (US) | 0.16710069 ft3 | 0.08355035 ft3 |
| 10 qt (US) | 0.33420139 ft3 | 0.16710069 ft3 |
| 25 qt (US) | 0.83550347 ft3 | 0.41775174 ft3 |
Standard used on this page
Source unit: US liquid quart, 2 US liquid pints, not Imperial quart. Target unit: cubic foot, 1728 cubic inches. This matters because pints, quarts, gallons and fluid ounces can refer to different systems in search results.
Sanity check
If your result is off by about 20%, the usual cause is mixing US and Imperial liquid units. If it is off by a factor near 1000, check whether the input was liters, milliliters or cubic meters.