Convert milliliter to US pint on the exact ml-to-pt page. The calculator works both ways: type ml or pt (US) and it updates the other field.
Describe the task to the AI assistant and continue from the result.
Open AI assistant →milliliter to US pint Converter
Formula: pt (US) = ml x 0.002113376419. Reverse formula: ml = pt (US) x 473.176473.
Conversion table
| milliliter | US pint |
|---|---|
| 1 ml | 0.00211338 pt (US) |
| 2 ml | 0.00422675 pt (US) |
| 5 ml | 0.01056688 pt (US) |
| 10 ml | 0.02113376 pt (US) |
| 25 ml | 0.05283441 pt (US) |
| 100 ml | 0.21133764 pt (US) |
Unit notes
A milliliter is one cubic centimeter and one thousandth of a liter. This page uses the US liquid pint, not the Imperial pint or US dry pint.
Common mistakes
Do not mix US and Imperial units unless the page explicitly says so. If the query uses ounce, pint, quart, or gallon, check whether it means a liquid volume unit, a dry volume unit, or a mass unit. This page is locked to milliliter -> US pint.
When this page is the right answer
Use it when the source value is already in milliliter and the target answer must be in US pint. For a different pair, use full volume converter, US pint to liter, US quart to liter, US fluid ounce to ml, cubic meters to US gallons.
Quick answer
1 ml = 0.002113376419 pt (US). In reverse, 1 pt (US) = 473.176473 ml.
Search-style examples
| Input | Converted result | Half of that result |
|---|---|---|
| 1 ml | 0.00211338 pt (US) | 0.00105669 pt (US) |
| 2 ml | 0.00422675 pt (US) | 0.00211338 pt (US) |
| 5 ml | 0.01056688 pt (US) | 0.00528344 pt (US) |
| 10 ml | 0.02113376 pt (US) | 0.01056688 pt (US) |
| 25 ml | 0.05283441 pt (US) | 0.02641721 pt (US) |
Standard used on this page
Source unit: metric milliliter, equal to 1 cm3. Target unit: US liquid pint, not Imperial pint. This matters because pints, quarts, gallons and fluid ounces can refer to different systems in search results.
Sanity check
If your result is off by about 20%, the usual cause is mixing US and Imperial liquid units. If it is off by a factor near 1000, check whether the input was liters, milliliters or cubic meters.