Convert US wine gallon to cubic foot on the exact wgal-to-ft3 page. The calculator works both ways: type gal (US) or ft3 and it updates the other field.
Describe the task to the AI assistant and continue from the result.
Open AI assistant →US wine gallon to cubic foot Converter
Formula: ft3 = gal (US) x 0.133680555556. Reverse formula: gal (US) = ft3 x 7.480519480519.
Conversion table
| US wine gallon | cubic foot |
|---|---|
| 1 gal (US) | 0.13368056 ft3 |
| 2 gal (US) | 0.26736111 ft3 |
| 5 gal (US) | 0.66840278 ft3 |
| 10 gal (US) | 1.33680556 ft3 |
| 25 gal (US) | 3.34201389 ft3 |
| 100 gal (US) | 13.36805556 ft3 |
Unit notes
Wine gallon is treated here as the US liquid gallon: 231 cubic inches, or 3.785411784 liters. A cubic foot is a volume cube one foot on each side.
Common mistakes
Do not mix US and Imperial units unless the page explicitly says so. If the query uses ounce, pint, quart, or gallon, check whether it means a liquid volume unit, a dry volume unit, or a mass unit. This page is locked to US wine gallon -> cubic foot.
When this page is the right answer
Use it when the source value is already in US wine gallon and the target answer must be in cubic foot. For a different pair, use full volume converter, US pint to liter, US quart to liter, US fluid ounce to ml, cubic meters to US gallons.
Quick answer
1 gal (US) = 0.133680555556 ft3. In reverse, 1 ft3 = 7.480519480519 gal (US).
Search-style examples
| Input | Converted result | Half of that result |
|---|---|---|
| 1 gal (US) | 0.13368056 ft3 | 0.06684028 ft3 |
| 2 gal (US) | 0.26736111 ft3 | 0.13368056 ft3 |
| 5 gal (US) | 0.66840278 ft3 | 0.33420139 ft3 |
| 10 gal (US) | 1.33680556 ft3 | 0.66840278 ft3 |
| 25 gal (US) | 3.34201389 ft3 | 1.67100694 ft3 |
Standard used on this page
Source unit: US liquid/wine gallon, 231 cubic inches. Target unit: cubic foot, 1728 cubic inches. This matters because pints, quarts, gallons and fluid ounces can refer to different systems in search results.
Sanity check
If your result is off by about 20%, the usual cause is mixing US and Imperial liquid units. If it is off by a factor near 1000, check whether the input was liters, milliliters or cubic meters.